🔌 Power your ride with precision and style—never get left in the dark!
These Car Battery Terminal Connectors from Moly Magnolia feature a 4-way quick disconnect design made from corrosion-resistant brass and steel, compatible with SAE/JIS Type A posts. The kit includes positive and negative terminals, insulation sleeves, cleaning brushes, anti-corrosion washers, and a hex wrench for easy installation and maintenance, making it ideal for cars, trucks, vans, and more.
Operation Mode | manual |
Contact Type | Normally Open |
Connector Type | Quick Disconnect |
Brand | Moly Magnolia |
Terminal | Screw |
Item dimensions L x W x H | 3.94 x 0.79 x 11.81 inches |
Circuit Type | 4-way |
Contact Material | Brass |
Number of Positions | 4 |
Control Method | Touch |
Color | Black/Red-1 |
Unit Count | 2.0 Count |
Number of Items | 2 |
Manufacturer | Moly Magnolia |
UPC | 728070728333 |
Item Weight | 1.76 ounces |
Product Dimensions | 3.94 x 0.79 x 11.81 inches |
Item model number | Moly Magnolia-Terminal Connectors |
Manufacturer Part Number | Moly Magnolia-Terminal Connectors |
Safety Rating | Não aplicável |
Voltage | 12 Volts |
J**S
Clamp too loose for thin wires (there is a solution). Otherwise great product
PROS:CheapFunctionalDecent qualityComes with lots of toolsFit on my batteryPretty easy to install if you have wire cutters and a bladeCONS:If you wire is too thin, you'll have to flip the little crimping mechanism upside down. As you can see in the photos, there's a little more meat on the top of the metal part that clamps the wire down. The positive terminal came from two wires, so there was enough wire to clamp down without flipping the metal piece. The negative end was too thin and could slip out. So I flipped the clamp upside down and it tightened down perfectly.Other than that small issue, I love the look and price of these. I hope they last a long time.
M**N
Quality
Easy to install. Replaced the battery terminals and they accommodated my battery cable easily. Best of all it is easy to remove from the battery and it is easy to add a component. It is a quality connector and functions well. It fit right over the terminals and after 20 minutes my car was ready to go.
M**E
Pretty sure they're gold plated zinc, nice enough for the price
Pretty sure they're gold plated zinc. You get what seems like a lot of stuff, but don't get too excited. The included wire terminals are for maybe 12 AWG and not great quality. The terminal cleaning wire brush isn't an expensive item to buy on it's own. The terminal screws could be stainless, but they are magnetic. The magnetic types of stainless steel are also usually not as corrosion resistant as non-magnetic ones. The primary cable connection for these is adequate. I used a nail nearly as large as the threaded opening, inserted from underneath to corral the bare wires inside the clamping section intended for them. I then used the Allen head screw to push the nail out of the way as I directed the Allen head screw into the threaded side. That group of wires combines into at least 0000 AWG, probably 5/8", and these connectors can handle it. Having the additional wiring locations is nice. I do plan to cut off those that I don't use, otherwise I have concerns that these terminals might be a little too large in some vehicles. At least remove any screws not being used and check carefully for unexpected contact points below this connector.Update: I like it better after actually installing it. The Allen head screws (5mm key) allow for pretty darn good clamping down of bare cable wires and ring terminals. The cam arrangement provides good clamping to top mounted battery terminals. On Amazon, Uxcell offers a pair of nice red and black covers that fit these as well, with provisions for the entrance of the two additional ring terminal cables per each, like they were made for use with these battery terminal connectors (B07X46DBTD). Be sure to assemble things with those included to begin with and avoid doing that twice.Rather than leaving my original notes above, I corrected statements to reflect my actual findings thus far.
S**K
worth the money
My husband and son put this on my older car 2005 KIA and it was easy installation for them. So far after a week working perfect like it should and simple disconnect. Fit great easy peasy removal. Looks like a great quality product.
T**R
Not bad.
I bought these for a project car that doesnt get driven much and has a slow drain. This made the disconnecting process much easier. Not that loosening a bolt is hard, but if youve done it long enough you know the bolts tend to find their way into the lead on the standard connectors, get boogered up, and the connector itself gets stressed and cracks. These probably will over time, but again, more simple. Also good for projects and boats because of the accessory wire mounts. Cleans up the look a bit, and beats having a stack of eyelet connectors sandwiched behind the normal nut or bolt lol.Would recommend using locktite on those bolts and the main wire clamping bolts though. They seem like they will back out with vibration kinda easy.
J**Y
Not the right fit
Got these for a 2018 Toyota Camry and they did not fit. Also one of the terminals came completely assembled and one came completely disassembled. Would not buy this brand again.
K**H
Brilliant idea
Easy to install,work great and make working on car easier
G**A
Good quality
Worked as it should. Seems like good quality & the extras help secure smaller wires to the post.. you can actually tighten the nuts and post snuggly without fear of breaking something...( So far so good)
Trustpilot
2 weeks ago
3 weeks ago