Walker EdisonWren Classic 6 Cubby TV Stand for TVs up to 80 Inches, 70 Inch, Charcoal

This took me about 3 hours to assemble by myself and it was doable. Having extra hands would have helped, but in my opinion not required. I have a weird shaped area for my TV so I was looking for a corner TV stand. I checked the measurements of the top prior to purchasing and the legs barely fit on the stand. It’s a 65” but may be better for those with legs closer together or near the center.I had to check, double check, and triple check the directions as I wish some portions “zoomed in” to see the holes or areas that you’re putting the parts into. The glue bottle was a bit frustrating as either some would come out full blast or you’d squeeze delicately and none would come out. Not a deal breaker though. If I had to do it all over again, I would in a heartbeat.The little stickers seemed cheap at first, but I’m really glad they included them to cover up the shiny bits inside. I enjoy the adjustable shelves. Once I set everything up, I hope to remember to take pictures to show the final result!! For now enjoy my trying-to-configure-everything mess. :) as you can see in the before pictures my TV was on the floor as it did not fit on the table I had before.

I love this so much it’s perfect for my living room. I read several reviews before buying it and some said it only took an hour to assemble but that was not my experience. I put it together entirely by myself and it took over 3 hours. I thought the instructions were confusing and after I put it all together I realized I had made a mistake. It comes with these stickers but it’s unclear from the instructions if they are supposed to cover holes or just to have if you dent it over time.Overall it is good for its price and I am happy with it. I just wanted to write this review to give a heads up that it will take forever to assemble but it is worth it in the end.

I have bought 3 of these now and I love them. The instructions are mediocre, but the pictures get you through it. I built it by myself in about an hour, but I had to take a couple pieces off and turn them around because the directions weren't clear. It wasn't a big deal but was frustrating. It comes with a tiny tube of wood glue which isn't enough.... but you don't really need to glue the rods in. It looks great and it comes with stickers to cover up the metal screw things or any scratches you get on it. It is very sturdy and large enough for pretty much any TV. I have a 75 inch on one and an 85 inch on the other. The third I use for other stuff.

I purchased the WE 58" TV stand in Espresso.  WE Furniture 58" Wood TV Stand Storage Console, Espresso OVERALL COMMENTS:It's pretty much what I hoped it would be for the price point. Not a piece that I'd feel particularly attached to but it's nice looking, structurally sound and stable, and fits my 55" TCL TV very well. Came well packaged, with all the pieces, and without any obvious defects. Assembly was not seamless, but I did not run into any major problems. I was able to assemble it by myself in about 2 hours (I am a 31-yo woman with experience assembling similar furniture).Generally, I'd recommend this piece if you're looking for something functional, attractive, and reasonably-priced. I purchased it on sale for $90 and would not pay more than $120-130 for this product otherwise (I've seen it on other websites for $130 and that seems a bit high for its actual quality).Read on for more specific details of my experience.SHIPPING EXPERIENCE:The product arrived within the shipping window: a day earlier than quoted at check-out but a day later than I was told after purchase. Not a big problem there. When the stand did arrive, the external packaging was in good shape; a little beat up but no holes, rips, or tears in the box or packaging tape.Upon opening the box, the contents were packed very carefully and seemed well-protected from the jostling of the shipping process.MATERIAL INVENTORY AND CONDITION:Before starting to build, I did an inventory of the materials. None of the pieces were missing and I had a few extras of some pieces (e.g., wooden dowels, cam lock-nuts, cam-screws, and stickers). All pieces were in good condition (e.g., no obvious nicks, scratches, or broken bits).ASSEMBLY EXPERIENCE:I was nervous as I began to assemble the stand, because some other reviewers noted several problems (missing pieces, inadequate drill-holes). Fortunately, I did NOT experience any of these problems. I initially attached the side panels (piece #3) to the legs upside down, and had to disassemble and reassemble the sides before I could attach them properly to the lower shelf (Piece #2) but that was definitely a user error and had nothing to do with the instructions.I struggled most when placing the top piece (piece #1) on the rest of the stand, because it was a little finicky aligning all the dowels and cam-screws with their respective holes on Piece #1. However, with a little slightly aggressive jiggling, I finally got the Piece #1 to settle in properly. This was definitely the hardest part of assembly and took me a while to sort out.Unlike other reviewers, all the cam, dowel, screw, and bolt holes were drilled into the pieces as expected. No complaints there.None of the screw or bolt holes were pre-threaded, so it required a bit of elbow grease to get the screws and bolts into the panels but resulted in a more stable product.Due to the tightness of the un-threaded holes and directive to do it all manually (without using power tools), screwing the cam-screws into the panels was tedious and my hand slipped a few times. I nicked one hole such that I splintered the edge around it a bit, but not in a way that damaged the integrity of the structure or that was noticeable once the screw was set.I didn't expect to like the stickers that came in the box to cover the cams, but once I tried them I found that they actually blend in really well into the wood and cover the cams effectively, so I personally chose to use them. You honestly cannot see them unless shining bright light onto them and even still they look better than most cam covers I've seen on similar self-assembly products.Overall, it took me a little over 2 hours to assemble this product by myself. I tend to be very methodical and purposeful, though, and probably could have finished faster if I'd wanted to. There was only one step during which I thought a partner would have been helpful to stabilize the middle panel (piece #4) while I attached it with bolts to the bottom shelf (piece #2). However, I managed just fine on my own.ASSESSMENT OF THE END RESULT:APPEARANCE: Overall, the final assembled piece looks nice. It doesn't look more expensive than what it is, but it doesn't look super cheap, either. I managed to avoid any major scratches during assembly and none were present right out-of-the-box.On a totally personal note, the espresso color doesn't match the rest of my furniture quite as well as I'd have liked. However, my furniture is a modge-podge of hand-me-downs, garage sale items, and Ikea-type furniture I've collected over the years, so it's not exactly a cohesive collection. The TV stand a bit more on the matte side (as opposed to lustrous) than I expected but is suitable.UTILITY: It fits my 55" TCL TV perfectly and has a lovely modern feel. I like that I'm able to mostly hide electronics cords but might have liked for the cord-holes to come 'closed', such that you would have the option to open them up. They are about the size of a fist and if not covered by electronics or decoration you can see right through to what's behind the stand.STABILITY: My stand is not shaky as some reviewers commented. All the pieces fit together snugly. I have total confidence in its structural integrity and ability to hold my TV. That said, I wouldn't drag it across the floor without furniture gliders and one would need to take care if moving it in a moving truck or even to a new location in the house. If I had to, I'd give it 3 out of 5 stars for stability. I have other self-assembled furniture that has a sturdier feel to it but I don't find this piece to be precariously assembled or wobbly.

I had to get a new tv stand because I ended up buying a 65” tv and my other one was too small. I was looking for something reasonably priced but sturdy and simple yet classy looking. I came across this stand and decided to order it.A couple of my friends were nice enough to put it together for me. I just love the end result! It is the perfect size for my tv and it looks great in my living room. It is simple yet classy like I wanted and sturdy. Here are a few pictures. It’ll look even better after I put things in the shelves. I love it.

I looked all over for a solid wood TV stand and finally decided on this veneer piece thinking it was inexpensive enough that I could replace it without too great a loss if I didn't like it. After assembling the product and setting it up, I'm delighted at the functionality and clean shaker-esque lines. The veneer is good enough to pass anything but the closest inspection. The one complaint I have is that the trim pieces that runs along the front bottom of the cabinet was actually cut 3/32" short and is noticeable from a few feet away. Everything else went together snug as designed.

Exactly as pictured. More heavy and sturdy pressed wood than I anticipated really, which was nice. Not recommended to use power tools, however, I did have to drill out some of the smaller pre-drilled spots to get traction. (Nothing too difficult and didn't splinter the board) Was only 3 holes out of the whole assembly, which wasn't much of a bother for me personally. Other than that minor issue, was affordable and I love the final product stand❣️

So far so good, very easy to build and quality is nice for what I paid . Overall I am happy with my purchase and pleased we got this tv unit . Time will tell if it lasts I hope it does

The media could not be loaded.  I love this unit, assembly was straight forward for 2 people, plenty of room for my tivo box, router and DVD player, l would recommend this supplier and this unit.

Love this unit & it is as all the good reviews say. Easy to put together, fire not niosy, looks very stylish & has stickers the match the wood to cover fixing.Only back thing is stickets unpeel themselves which is the only part that lets it down. Need to find a solution for this as sticker pattern themselves are really good.Any suggestion would be much appreciated .... please @:)

This is a really nice unit and the electric fire looks lovely. Unfortunately, the remote control is useless. We have been unable to operate the fire using the remote control as the buttons seem to have a mind of their own. Very frustrating.

Loved it once I got it assembled, easy enough with two people.