DEWALT FLEXTORQ Right Angle Drill Adaptor, 4-in-1 System, 12-Inch (DWAMRASETFT)

Every drill should come with this as a standard attachment. Great in tight spaces. Easy to use function as it should. Good quality.

Heavy duty. Typical marketing hype says flex attachment is 12", and it is end to end, but when you insert it you lose 1", so when in fact it's inserted, it actually extends your working length 11". That's important to someone looking at total extensibility / reach.Now the head is designed to mount up to the flex extension directly and lock into place. This extends your working bit out to about 13" at 90°. Both head and flex attachment are magnetized, so you could use the flex extension as a direct extension of your impact or drill, whichever you're using. DeWalt say's it's only to be used with impact power tools, but we all know they're just covering their butt legally and some folks use these attachments in power drills as well as ...God only knows what creative types will come up with.There are two handle attachments included. The 4" with the head mounted to it puts your bit out 5" from the impact tool. It also gives you a nice 4" 4 finger grip to hold it. As well, this setup can be inserted into the flex attachment on the quick if you need to extend it for 1 or 2 items real quick.The second handle in the pic is misleading as it actually has a plastic mount attached to it so you can attach the handle to the back of the head and lock it on. It can not be used with any other attachment. When you insert the head into your impact directly, it gives you the ability to hold the head in place from twisting if your using a socket or bit on something that requires an excessive amount of force, pressure, or torque, or to keep it stable drilling into whatever. The handle itself is threaded and removable so you can screw it into the other side of the handle-head-mount for you lefties, or if you need to invert the bit to work upside down or in an odd position._My ONE COMPLAINT! -- ARE YOU READING THIS DEWALT ENGINEERS?!?The little strait handle must be unscrewed 1/8" from the mount in order to fasten it to the head, then screwed back in. The head is not perfectly round and it seems the engineers overlooked this. The nub the strait handle screws into is too short to fit the handle at the point it goes on before you turn it to lock it onto the head! Both sides engineers!_DeWalt ENGINEERS need to take this small handle-mount part back to the drawing board. Otherwise a fine accessory.BTW, the head is 1" wide and adds 1.5" to your inserted bit length. The actual horizontal head width is 1.25" fwiw.The flex extension is stout and holds it's position without sagging while your busy doing other stuff. It will be in the same position when you come back to it. Mount the head on it and push the yellow button under the word DeWalt on the side of the flex accessory handle, slide it forward and attach it to the head. Now you have the same 4 finger grip at the end of the flex accessory as you did with the other handle!Like my title says, "This is one bad a** heavy duty accessory that fits my Ridgid (or any 1/4" hex drive) impact !!! " This 4-in-1 is built with commercial grade materials and the professional in mind, but made for all who want it. I only wish I had gotten one years ago! Enjoy...

The media could not be loaded. This one I have not used yet but I can assure you that from my other one this is absolutely the only way to go when it comes to getting in and out of a tricky spot it has good torque it's very durable and it fits nicely into your impact or your drill I always keep several of these on hand because you never know when you're going to need to get into a tight space!

Great Tool--versatile. The little handle to stabilize for impact driving (with modifiable left right placement) is not as pictured. They show a little handle with a knurled handle (that can be used to store a bit). The handle with units that shipped this month (Feb. 2025) has the handle without a knurled removable knob at the top, although it has a hexagonal recession. Product on Amazon shows this former handle (all other parts are the same).Other than that, it works in 4 configurations. Flex extension alone, flex extension with small right angle adaptor, Small right angle adaptor alone and small extender with the right angle extension. Able to get into some old windows, under the hood of my car with ease with the power I needed.

First Impression: About twice as heavy as I expected, and very welcome.The different setups should resolve most problems related to using a power driver in limited space. I like that it works with my power drill, cordless screwdriver, and manual screw driver.This complete unit replaces a cheap cable one that started falling apart upon its first use. I’m very happy with this unit; well worth the money!

Got this to help me remove the can lights around my house. The space is so tight you can not fit a drill. This attachment made removing the cans a breeze

Works great for hvac techs

Love this tool. Good grip, build quality is sound. very functional, and easy to use.Highly recommend these anglers